Insulation and energy efficiency · Licensed & insured

Lower energy bills, measured before and after with a blower door.

Insulation, air sealing, energy audits and whole-home upgrade packages with heat pumps. Each service below shows what it usually costs and how long it takes, and every job is tested before and after, so you see the result in numbers, not promises.

Text us a photo from the attic hatch or your last winter bill, and a licensed supervisor replies within 5 minutes during business hours.

  • 5Energy services
  • 2 hrs–6 wksTypical timelines
  • 4.9410 reviews
  • 24hWritten estimate

Why energy upgrades disappoint

Most energy upgrades underdeliver because of the order they are done in.

Homeowners are sold windows or a new system first because those are the biggest tickets. The savings come mostly from the cheaper work that should have come first: sealing and insulating.

Equipment sized for a leaky house

A heat pump sized before the house is sealed ends up too big and costs more to buy and run. We audit and seal first, then size the system with a room by room load calculation.

Paying for the slowest payback first

Windows cost the most per dollar saved. Air sealing and attic insulation cost the least. Our plan ranks every upgrade by payback so your first dollars do the most work.

A tight house with stale air

Sealing without ventilation can trap moisture and fumes. We test gas appliances for safe venting and add fan controls or an ERV when the numbers show a need.

Energy services we deliver

Insulation, audits and upgrade packages, each with its own price.

Start with the service nearest to your problem. The two main pages carry price tiers, materials, common findings and a schedule; the smaller jobs below are quoted inside the same written plan.

Home insulation

Attic, wall and crawl space insulation in cellulose, fiberglass or spray foam, sealed for air leaks first and priced by R-value.

Typical range
$2.5k–$30k
Typical time
1 to 5 days
See home insulation prices

Home energy audit

Blower door test, infrared scan and bill review, with every upgrade ranked by payback for your house.

Typical range
$300–$600
Typical time
2 to 3 hours

Priced inside your energy estimate, no separate page yet.

Air sealing

Gaps at the attic floor, rim joists, chimney and plumbing chases sealed with foam, caulk and flashing.

Typical range
$1,000–$3,500
Typical time
One working day

Priced inside your energy estimate, no separate page yet.

Heat pump water heater

An efficient electric water heater that uses a third to half the power of a standard tank.

Typical range
$3,000–$5,500
Typical time
One working day

Priced inside your energy estimate, no separate page yet.

Not sure which one you need

Match your problem to the energy service that fixes it.

People describe energy problems by how the house feels: cold floors, a hot upstairs, a huge oil bill. Pick the line that matches yours and the supervisor confirms it during the audit.

Ask a supervisor which one fits
If you want toStart with
Find out where your house loses energy before spendingHome energy audit
Stop drafts and cold floors at a low costAir sealing
Warm up cold rooms, stop ice dams or insulate empty wallsHome insulation
Replace an old furnace or get off oil with a heat pumpEnergy efficient home upgrades
Cut the cost of hot waterHeat pump water heater

Energy costs at a glance

What each energy service costs, side by side.

Typical totals for a 1,500 to 2,500 square foot house before utility rebates. The written plan lists the same lines, adds the rebates you qualify for and shows the net price.

Energy and insulation cost and time by service
ServiceTypical rangeTypical time
Home insulation$2.5k–$30k1 to 5 days
Energy efficient home upgrades$3k–$90k1 day to 6 weeks
Home energy audit$300–$6002 to 3 hours
Air sealing$1,000–$3,500One working day
Heat pump water heater$3,000–$5,500One working day

Totals shown include labor, materials and testing and exclude rebates; after the audit or visit the written estimate replaces each range with one fixed number.

How an energy project runs

From the first bill you send to the final blower door test.

Four steps whether the job is one day in the attic or a full package ending with a heat pump commissioning.

  1. Step 01

    Free assessment

    On-site visit, scope review, honest repair-or-replace opinion. No pressure, no decision needed that day.

  2. Step 02

    Fixed-price plan

    Itemized quote with Good, Better and Best options, a declared contingency and a dated schedule.

  3. Step 03

    Permits and prep

    We pull permits, schedule inspections and send you a room-by-room prep checklist.

  4. Step 04

    Build and walkthrough

    Daily updates, clean site every evening, final walkthrough and a written warranty in your hand.

Written into every contract

Six promises you can hold us to.

Price lock

The approved price is the final price. Change orders only with your written approval.

On-time or we pay

A credit for every working day of delay we cause. Weather and inspections excepted, in writing.

Clean site, every day

Dust barriers, floor protection and a clean-up before we leave. Your home stays livable.

Daily update guarantee

A text or email every working day with photos and tomorrow's plan, or the day is free.

10-year warranty

Workmanship warranty in writing, transferable to the next owner, backed by a fixed address.

Milestone payments

A small deposit, then you pay only for work that is already completed, inspected and photographed.

Get my energy estimate with these guarantees

Other energy work we quote

Small energy fixes, added to the same written plan.

Duct sealing, weatherstripping, radiant barriers and ventilation fixes are carried out by the crews already at your house and added as lines to your energy plan.

  • Wall Insulation
  • Blown-In Insulation
  • Spray Foam Insulation
  • Batt Insulation
  • Crawl Space Insulation
  • Insulation Removal
  • Weatherization
  • Energy Audit
  • Energy Efficient Door Installation
  • Solar Ready Roofing
  • Solar Panel Installation
  • Radiant Barrier Installation
  • Ventilation Upgrade
  • Whole House Fan Installation
  • Net Zero Home Renovation
  • Passive House Retrofit
  • Green Home Remodeling
  • Sustainable Remodeling

Energy questions

What people ask before choosing an energy service.

Do I need an energy audit before insulating?

Not always for a simple attic top-up, where a look in the attic is enough. For walls, crawl spaces or any heating and cooling decision, yes: the blower door test shows where the leaks are and proves the result afterward. The fee is credited when you go ahead.

Should I insulate or get a heat pump first?

Insulate and seal first when your current system still works, because a tighter house needs a smaller, cheaper heat pump. If the furnace or air conditioner is failing, equipment may need to come first, and we plan the sealing right after.

What is the difference between home insulation and an energy upgrade package?

Home insulation covers the attic, walls and crawl space with air sealing. An energy upgrade package starts with an audit and can add windows, a heat pump, a heat pump water heater and ventilation, ranked by payback.

Which energy service pays back fastest?

Air sealing and attic insulation, often within a few years. Heat pump water heaters come next in many houses. Heat pumps and windows cost more, so they pay back over longer periods unless the old equipment needs replacing anyway.

Can rebates lower the price?

Often. State utility rebate programs commonly help with audits, insulation, air sealing, heat pumps and heat pump water heaters. We list the programs your address qualifies for and help with the paperwork, without promising what a program will approve.

Why do energy upgrade prices differ between states?

Climate zones set different insulation targets, rebate programs differ state by state and so do wages. The ranges here are national typicals; your plan is priced for your address, your climate zone and the rebates you actually qualify for.

Energy crews near you

Your remodeling address, within our service area.

Energy work is done by nearby crews licensed in the state your house is in, built to the insulation targets of your climate zone. Every state license number is published.

  • Maine
  • New Hampshire
  • Massachusetts
  • Rhode Island
  • Connecticut
  • New York
  • New Jersey
  • Pennsylvania
  • Delaware
  • Maryland
  • Virginia
  • North Carolina
  • South Carolina
  • Georgia
  • Florida
  • Check your remodeling address

Free energy estimate

Pick your energy service. A tested, written plan follows the visit.

Name the energy job you have in mind and a supervisor texts back, within 5 minutes on business days, to book the audit or the visit.

Text my quote Call now

Images marked as AI concepts illustrate remodeling ideas, materials and conditions. They are not photographs of completed ProBuild projects or verified before-and-after pairs.

Your remodeling question

Discuss Insulation and Energy Efficiency Services

Tell us what you want to change. Request a call or estimate; preferred visit times are confirmed separately.

Pre-book a visit (optional)

A supervisor confirms the slot by phone or text before it is booked.

Before your next decision

Still comparing your remodeling options?

Review the questions that make estimates easier to compare, or ask about your own project when you are ready.